Untitled ADA394
Untitled ADA394 (#ADA394) is a soft, nearly neutral shade of amber. In paint terms it sits in the warm family with HSL values of 36°, 13%, 63%, which means it behaves predictably in interiors — a faint green undertone in low light — without going chalky or muddy when the wall is large.
The closest commercially available paint matches are Sherwin-Williams Western Reserve (SW 9597, #A8A294); Benjamin Moore Quicksand (CSP-200, #AEA497); Behr Toasty Gray (BWC-26, #A4998A). These are the nearest swatches by Lab-color distance — your local paint counter can custom-mix the exact hex if none of them are close enough.
On cabinetry in a typical home office, Untitled ADA394 reads as a confident, soft color rather than a background. It holds its character at scale, so test a 24×24 inch board on the wall before committing — a step covered in our paint-sampling checklist — because the chip in your hand will always look slightly different from the same color spread across forty square feet.
Pair Untitled ADA394 with warm whites, raw wood tones, and unpolished brass hardware for a layered, lived-in look. If you prefer something cleaner and more contemporary, drop the wood and let it sit against bright whites and matte black fixtures — there is a side-by-side reference of warm vs. cool styling that walks through both directions.
For trim alongside this color, choose a white that shares its undertone rather than a generic builder white — otherwise the trim will read dingy by comparison.
A short way to remember Untitled ADA394: modern in a contemporary space, traditional in a period one. That single sentence is usually enough to decide whether to pin it to your moodboard or move on to the next swatch.
Where Untitled ADA394 tends to fail is in rooms it was never asked about. A amber designed for a calm bedroom can read sluggish in a kitchen with bright daylight pouring through a sliding door, and a color that anchors a moody dining room can disappear in a long, north-facing hallway. The fix is rarely to abandon the color — it is to use it on a smaller surface, or to lift the lightness by a single step. Both adjustments are inexpensive once you understand what the color is doing.